A
high quality "sprayable putty" for fairing and priming composite marine
surface—an integral part of the Duratec Marine
System.
Usage For
one-off and production composite yacht priming and osmosis and blister repairs.
Formulated for below-waterline, topside and deck surfaces.
Features Add
quality, save time and build in protection with Duratec Vinyl Ester Fairing Primer. Here's
why you should choose Duratec Ester Vinyl Ester Fairing Primer: Application—apply
with sprayer, roller or brush. Saves time and labor. High
build—to 2-4 mils, 80-160 microns, wet on wet, without sagging on vertical
surfaces. Quick cure—rapid
curing; far faster than epoxy resin systems. Primer will be ready to sand in 1-5
hours, depending on thickness and temperature. Osmosis
and blister resistance—the glass microsphere-filled primer
offers excellent resistance against osmosis and blister damage. The vinyl ester
chemistry has proven its performance on more than 2000 boats and yachts over a
seven-year period. Easy
sanding—hollow glass microspheres in the primer allow
for rapid sanding. Also saves time and labor.
Product
Properties
All
time calculations are based on temperatures of 77°F,
25°C
Viscosity
As measured on a Brookfield Viscometer Model
RVF, Spindle #5 at 20 rpm - 2400
cps +/- 200 cps
Thixotropic Index - 6.5
Gel Time
Sample based on a 100 g mass, catalyzed
at 2 percent with mekP - 14 min
Weight per Gallon - 6.78
lb., 3.08 kg
Volatile Organic Compounds - 146
g/L
Coverage per Gallon
10 mil wet film thickness - 100-115
ft2
250 micron wet film thickness -
10.2-10.7 m2
| 
