A superior product
for gelcoat repair and for enhancing tooling gelcoat properties.
Blended with gelcoats
for gelcoat repairs; blended with tooling gelcoats to
upgrade mold surfaces.
You'll get a superior
finish, add quality and save time and labor with Duratec
Polyester Hi-Gloss Additive.
Here's why you should
choose Duratec Polyester Hi-Gloss Additive:
used for repairs, blending the additive with gelcoat produces
a low porosity surface.
Reduced orange peel---the
low viscosity of the blend results in a smooth finish
that is easily sanded.
mold surfaces, the blending of the additive with tooling
gelcoat creates a higher heat distortion temperature,
improved gloss retention, increased impact resistance
and reduced subsurface porosity.
blended one-to-one with gelcoats, the additive creates
an air-cure, enamel-like coating. No air-dry additive
is required. When used for gelcoat repair, surfaces are
restored to like-new condition.
the time of manufacturing)
time calculations are based on temperatures of 77°F,
As measured on a Brookfield Viscometer Model
RVF, Spindle #2 at 20 rpm - 110 cps
Thixotropic Index - 1
Sample based on a 100 g mass, catalyzed
at 2 percent with mekP - 16-20 min
Weight per Gallon - 8.0 lb.,